12.1" TFT Metal-housing Panel PC
General Description
The rugged PANEL PC DCP-112, SEALED to NEMA 4/12 stander, provides protection from shock,
vibration, dust and moisture. The DCP-112 is 100% IBM PC/AT compatible integrating super I/Os,
VGA, 12.1" TFT FLAT PANEL, touch screen controller, Ethernet, and packing special industrial features
like watchdog timer, COMS double backup, all in a single system.
 
Features
* NEMA 4/12 water/dust-proof sealed front panel.
* All-in-one design reduces system cost and increases system performance
 
Performance
* With one 2.5" HDD.
* 60W power supply.
* 12.1" ELO anti-glare analog resistive Touch screen is optional
 
Specifications Chassis
* Construction :Heavy-duty
* Dimensions : Width: 13.8"(350mm) Depth: 4.3"(108mm) Height: 10.5"(266mm)
 
Flat Panel Display
* Display type : 12.1" color TFT LCD
* Max. resolution : 800x600p pixels
* Display mode : Normally white
* Display colors: 262,144
* Viewing direction : 6 o'clock (in direction of maximum contrast)
* Pixel pitch : 0.3075 (H) x 0.3075 (TYP) mm
* Pixel arrangement : RGB vertical stripes
* It can be modified to 9.4" , 10.4" ,15.1" LCD Display size
 
Power Supply
* Output rating : 60W
* AC Input voltage : 90VAC to 260VAC
* Input frequency : 47 to 63Hz
* Output voltage : +5V@8A, +12V@3A,12@0.5A
* Safety : UL, CSA, EN,CE
 
Touch Screen Panel(optional)
* Type : Analog resistive
* Resolution : Continuous
* Light transmission : 55% TO 57%
* Controller : RS-232 interface
* Software driver : DOS & WINDOWS
 
Environmental Specifications
* Operating environment : 0J to 45J
* Storage temperature : -20J to 60J
* Relative humidity : 5% to 85%, non-condensing
 
Embedded all-in-one CPU Card
* System : Supports Pentium 75-333MHZ 586 grade CPU (Socket 7 w/o CPU)
* System memory : Two 72-pin socket, up to 128MB EDO/FPM DRAM
* Cache size: 512KB synchronous Pipeline burst SRAM
* Watchdog Timer : Programmable watchdog timer
* Serial Port :1 RS-232C/TTL, 1 RS-232C/422C485,1 RS-232C and 1 RS/232C/IrDA
* Parallel Port : 1 bi-directional parallel port
* IDE Interface : Internal EIDE interface*1
* FDD Interface : External FDD interface*1
* Keyboard Connector : PS/2 keyboard interface*1
* PS/2 mouse Connector : PS/2 mouse Interface*1
* Speaker : internal buzzer and external speaker
* Display : C&T T65550 and SIS5582
* LAN : 10/100Mbps,with UTP support
* Bus Interface : 1PCI Bus and non-stack through PC-104 Bus; PICMG optional
* VGA/LCD Display : 2MB VRAM(PCI BUS)
* Supports one socket for Disk On Chip
* Real Time Clock : BQ3287MT or compatible chips with 128 bytes data RAM
* Customer Consign CPU card available
@
 

Home
Sitemap
PC Base CNC Controller Keypad LCD Monitor